Juki DLU-5490N Bottom & Variable Top Feed Lockstitch

JUKI DLU-5490N

1-needle, Bottom and Variable Top-feed, Lockstitch Machine

With its bottom and variable top-feed mechanism, the machine widely adapts to diversified applications and helps promote the production of upgraded-quality products while increasing efficiency.

Remaining bobbin thread detector  AE-4＊ Part No.: GAE-040000A0

When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal.
With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread.
To retrofit the AE-4 to your existing machine, I/O unit A (part number: 400-06080), which is separately available, is required.

Material edge sensor ED-2

When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer.
This enhances productivity by allowing the operator to conductsewing work without running to look out for missing stitches.

Partial shirring device PF-6

The partial shirring device permits very easy shirring.

Micro-lifter  Part No.: 112-43763

This device can be installed on the back of the faceplate.
It is very convenient for frequent use.

CP-160A

Pattern sewing can be performed by the number of stitch control feature.
Four different kinds of pattern sewing are possible:
automatic reverse stitching, constant-dimension sewing, rectangle-shape sewing, and multi-layer stitching. 
The maximum number of stitches that can be set for automatic reverse stitching (single or double) is 19.

SC-910/M91

SC-910 model control box is resistant to voltage fluctuations.
It comes with a compact and energy-saving type switching power supply system that does not use a transformer. This contributes to improved reliability.
The M91 model compact motor unit featuring low vibration and low noise capabilities is installed on the control box.
The number of revolutions can be selected from among three different types (standard, slow and fast) according to the preference of the operator.
In addition to this feature, the control box incorporates many different functions for upgraded workability