Brother KE-430HX-05 Bar Tack Heavy Weight

User program setting method

Patterns, X scale, Y scale, sewing speed and work clamp height can be registered into programs.
When a program number is selected, the pattern which has been set for that number can then be sewn.
Standard program numbers S001 to S089 (S001 to S064 for the 438HX) have patterns preprogrammed into the program
numbers with the same numbers as the pattern numbers, and these pattern numbers cannot be changed.
All items in user program numbers U001 to U100 and additional program numbers A001 to A500 can be set as desired by the user.

Work clamp height setting method

The work clamp height is always displayed on the home screen during sewing standby mode, and it can be changed at any time.
If the work clamp height is changed, the same change will be applied to all programs.
1. Touch the work clamp height value on the home screen to
switch to the work clamp height setting screen.
2. Touch the setting value to be changed depending on whether
the item to be edited is the maximum height "H:" (2) or the
intermediate height "L:" (3). The value for the selected item to
be edited will be highlighted.

Sewing speed setting method

The sewing speed is always displayed on the home screen during sewing standby mode, and it can be changed at any time.
The changes made at this time will be reflected in each program, so this is a useful way of changing programs while checking actual
sewing.

X scale and Y scale setting method

X scale and Y scale are always displayed on the home screen during sewing standby mode, and they can be changed at any time.

Program selection method

You can use a standard program which has already been registered and additional programs which have been registered to create
user programs and cycle programs