Genuine Blade Set Juki MO 6716 Industrial Overlock Sewing Machine

Original Blade Set for Juki MO 6716 Industrial Overlockers

Changing the blades on your industrial overlock machine is a straightforward process:

1. First, ensure the machine is turned off and unplugged for safety.

2. Locate the screw or screws that secure the blade in place, usually found underneath the machine near the blade.

3. Using the appropriate screwdriver, carefully loosen and remove the screws, keeping them in a safe spot for later use.

4. Gently remove the old blade, being cautious as it may be sharp.

5. Take the new blade and align it properly in the blade holder, following the manufacturer's instructions. Some blades have alignment marks to assist with this step.

6. Once the new blade is correctly positioned, reinsert and tighten the screws securely to hold it in place.

7. Check the blade to ensure smooth movement without any obstructions or misalignment.

8. Plug in the machine and turn it on to test the new blade. Stitch a few times on scrap fabric to confirm proper cutting and functionality.

Part Numbers:
- Top Blade: 131-50602
- Bottom Blade: 131-50701