Genuine Brother Upper & Lower Blades Set For Industrial Overlock Machine

Genuine Brother Top & Lower Blades for Industrial Overlock Machine

Replacing the blades on your industrial overlock machine is crucial for maintaining smooth and precise cutting performance. Here's a simple guide to help you through the process:

1. Ensure the machine is powered off and unplugged to prevent accidents.

2. Identify the screw or screws securing the blades. These are typically located underneath the machine near the blade assembly.

3. Using the appropriate screwdriver, carefully loosen and remove the screws. Keep them in a safe place for reassembly later.

4. With caution, remove the old blades from their position. Handle them carefully as they may be sharp.

5. Take the new blades and align them properly in the blade holder according to the manufacturer's instructions. Look for alignment marks for guidance.

6. Once aligned, reinsert the screws and tighten them securely to hold the new blades in place.

7. Check the blades to ensure they move smoothly and freely without any obstruction or misalignment.

8. Plug in the machine and turn it on to test the new blades. Stitch on a piece of scrap fabric to verify proper cutting performance.

Part Number: 144074:112436-001