Juki AMS-252HC10060S06/X77026NSH-BB4 Two Needle CNC Turning Head (1000x600)

Juki AMS-252

Two Needle CNC Turning Head Machine

The machine-head-turning mechanism helps achieve high-quality seams uniformly in every sewing direction

JUKI's unique synchronization technology controls the machine head, hook and feed mechanism, thereby creating the most favourable seams. In case of continuous circumference sewing, the sewing machine constantly detects the direction of sewing. As a result, consistent-quality seams are produced regardless of the direction of sewing.

With its sewing area of "1,000mm X 600mm" the AMS-251 is best suited to the sewing of decorative stitches and large-size products

The sewing machine is ideally suited to the sewing of decorative stitches on car seats, luxury bags and school bags, but also to the sewing of large-sized products with zero design tolerance for irregular stitches. In addition, the sewing machine can be used for sewing two or more pieces of small products at a time.

Multiple Uses Guarantee Efficient Work and Quality Improvement

Slip Ring System

Slip Ring System has been adopted to the new machine-head turning mechanism. As a result, limitless turning of the machine head is enabled to allow the sewing machine to sew complicated patterns continuously.

Cutting Point Needle

The cutting point needle can be used regardless of the sewing direction since the sewing machine constantly faces the sewing direction at its front.

Machine Head Lifting Function

Since thick materials, claps, palettes with protrusions can be used, design will be expanded.

Multi-axis Control Technology

The Multi-Axis control technology used by JUKI are applied to simultaneously control six axes.

Horizontal-Axis, 3 fold-capacity rotary hook

Adoption of the 3 fold-capacity hook helps reduce the frequency of bobbin replacement even when thick thread is used, thereby supporting sewing of large products.

Operation

The IP420 for the existing AMS Series models has been adopted for the new AMS Model. In addition, the existing sewing pattern input software "PM1" is also applicable.

Safety Cover

Opening and closing sensor is mounted to the turning-head cover and turning-hook cover to prevent the machine from starting when the cover(s) are opened to automatically stop the machine whilst in operation.

Start Button

A 2-Handed start button has been adopted for safe, accurate start-up. In addition, unintentional start-up of the machine is prevented.

Bobbin Replacement Cover

Bobbin can be changed easily by opening the accessible cover without requiring the operator to reach under the machine to change the bobbin.