Overlocker Hex Screwdriver E Series (1.56mm) Pegasus

Pegasus E Series Overlocker Hex Screwdriver (1.56mm)

Product Code: 179P=323-858-200

Designed for the needle set screw and various applications, the Pegasus E series overlocker hex screwdriver simplifies maintenance tasks.

Changing needles is straightforward with these steps:

1. Turn off and unplug the overlocker.
2. Raise the needle bar to its highest position.
3. Loosen the needle set screws counterclockwise.
4. Remove the old needle(s) carefully.
5. Insert the new needle(s) into the needle holders.
6. Tighten the needle set screws securely but not overly tight.
7. Lower the needle bar to its regular position.